Honeywell pro series thermostat is among the top thermostats available in the market. This series comes in the t4, t6, t8, t10, and more models.
The pro series thermostat is rectangular or square and is compatible with Google, Home kit, IFFFT, Alexa, and Cortana.
These thermostats can connect to wireless networks, allowing you to perform more functions. The display shows time, mode, schedule, menu, fan, and more depending on the model.
Prices of the Honeywell pro series range from 43 dollars to 265 dollars on amazon. You can easily schedule to your preferred times and temperature.
Plus, this thermostat can learn your schedule over time and adapt to it. With the Honeywell pro series, you are assured of a good experience.
Table of Contents
Is Honeywell home pro series a smart thermostat?
Honeywell pro series t6 and t10 are smart thermostats. The Honeywell t6 provides you with easy control no matter where you are.
You can easily link to their application to adjust the schedule and temperature and automatically respond to changes.
When connected to a wireless network, it can easily change the temperatures and is well suited to the steps on the heating structure.
The t10 model can record the cooling and heating pattern around your house. With this model, you will get notifications as soon as there are slight changes in the weather. When it gets too icy, it will activate the frost protection.
How to turn on the Honeywell home pro series thermostat?
To turn your Honeywell pro series on, turn on the power from the breaker switch or box. After this, you can access the home screen with the menu, mode, fan, time, and more.
How to turn off the Honeywell thermostat pro series?
To turn it off, go to the breaker switch or box and turn the power off. Alternatively, remove the Honeywell thermostat cover, take the batteries off, and put them back on.
What does recovery mean on the Honeywell pro series thermostat?
When a Honeywell Thermostat is in recovery mode, it has just come out of an energy-saving mode. To set itself to the ideal temperature, the thermostat activates the HVAC scheme earlier than planned.
It is a smart feature, similar to emergency heat, that turns on if there is a lag between turning on your thermostat and reaching the temperature you want.
The Honeywell thermostat will begin heating your house about an hour before nine am when you want a temperature of 70° Celsius.
It will ensure that you have the ideal temperature at that time. The temperature begins to drop earlier than expected when it’s warm outside.
Is Honeywell pro series thermostat Wi-Fi?
For the Honeywell t6, you can permit geofencing with this Wi-Fi thermostat to conserve energy when you are not around.
Over time, it can learn your desired levels of comfort and cools and heat according to schedule. When your plans switch, you can quickly change the temperature in your house using connected devices.
In the pro 800 series, you can program your thermostat using Wi-Fi to schedule temperatures and times for each day.
You can even use the holiday and vacation schedule to conserve energy. The t4 pro also allows the use of Wi-Fi to program various plans.
Honeywell t10 also uses a wireless network to provide comfort and save energy at home.
How to connect the Honeywell pro series thermostat to Wi-Fi?
To connect to a wireless network, follow the steps below:
- Start by installing the Honeywell application available on Android and Apple.
- Ensure that the Wi-Fi setup displays on your Honeywell screen. However, if it has not, you must do it manually by pressing the up and fun button for five seconds; you can do this until 2 numbers show up on the thermostat screen. Click on next till the digits on the left switch to thirty-nine. Make use of the arrows pointing up and down to adjust the number to 0, then tap on the done option. You will have switched the wireless network setup mode.
- Check the available networks using your phone or any other gadget. Find a network with the new thermostat 123456 though the digit at the end may be different.
- After that, mobile or any other device will unlink from other wireless networks and only link to your Honeywell thermostat. Depending on your device, you may choose if the network should be public, home or office. Select the home network.
Why won’t my Honeywell thermostat pro 6000 series shut off?
Your Honeywell thermostat pro 6000 series may not be shutting down due to various reasons, which include:
- Your Honeywell pro 600 sensors could be malfunctioning. It indicates that your Honeywell thermostat is misreading the temperature in your home as being higher than it is. As a result, even though the fan is supposed to turn off, it continues to run.
- Extreme temperatures might also exist inside your home. Your home is probably too hot because the fan on your Honeywell thermostat is still running.
- You must check your thermostat’s settings to see how they have been set. You might have set the schedule to excessively cool your house.
- The fan might have a manual switch that is switched on. Your fan is still operating because it is set on rather than put to auto.
- There might be a system in place for manual override. It means that even though your house may be cold, your Honeywell thermostat has manually been instructed to continue running the fan.
How to reset the Honeywell thermostat pro series?
● With batteries
Please turn off your Honeywell Thermostat, take the batteries out, and reinstall them with the negative terminals facing the positive. Reposition them correctly after five seconds.
● Without batteries
You need to know the model you use as different Honeywell thermostats are reset differently.
Before resetting your thermostat, you must consider the settings and reconfigure the devices based on their model number. This article will consider the Honeywell t5, t6, and t5 + pro series. Here’s how to reset your:
Factory default settings
✔ Confirm if the device is turned on since it must be on for this reset
✔ Click on the menu option and hold it continuously for five seconds.
✔ Navigate to the left and pause when the reset option appears
✔ On factory tap select
✔ You will get a notification confirming if you are sure of the step; press yes, and your thermostat will reset.
Wi-Fi
✔ Have your tablet or phone proceed to settings, turn off your mobile data and Wi-Fi, and then enable airplane mode.
✔ Open the Honeywell home application, select the device you are using, then head on to the settings for your thermostat by clicking the cog wheel.
✔ After clicking reset Wi-Fi, the thermostat application will take you through the process.
✔ Select and hold the temperature view from the Honeywell thermostat, which will broadcast the thermostat Wi-Fi. Then click next from the application to proceed.
✔ Select a lyric network name; the thermostat application will give you nails on the thermostat configuration click next.
✔ Fix your gadget to your thermostat by putting in a four-digit layout and pressing done
✔ Select the home network option, enter the password, and click next.
✔ Once the wireless network reset is finished, give it three to five minutes for your mobile application and the thermostat to connect.
✔ The thermostat will appear on your phone application.
Honeywell schedule
✔ Tap the menu option, then hold it
✔ A reset choice will be displayed on your thermostat; click on it
✔ Choose the option to schedule
✔ You will have successfully reset your schedule.
Settings for your Homekit
✔ Click the menu option and hold it.
✔ A reset option will appear; click on it.
✔ Click on the home kit reset by tapping on it
✔ You will have successfully reset your home kit
How to program the Honeywell pro series thermostat?
✔ Start by pressing the year using the plus and minus buttons and press select, do the same for the month.
✔ Next, you need to select the day using the (+) and (-) buttons and then click select.
✔ After you are done, choose either the twelve-hour or twenty-four-hour format using the positive and negative keys, then press select.
✔ Once done, use the same key to select a time and press select once you have your desired time; this will save your settings.
✔ Tap the home button to access the settings for different modes, and click the (+) and (-) button to get the ideal mode.
✔ You can use the advanced menu to switch the scheduled programs and times. Click either the positive or negative key to navigate the advanced menu option, then press select.
✔ If you want to edit your program, make sure the program option is on, then click on select, use the positive or negative button to get the program you want to edit, then press select.
✔ You can only select four time periods every day weekends and weekdays, wake and sleep time, and away and home options. To set the cooling and heat schedules, select to fix the time you want. First, you will select the heating temperature. Click either the (+) and (-) buttons to set the right temperature and click on select, do the same for the cooling temperature.
✔ Select and choose the time if you want to turn off the programmed schedules. Click plus switch on to off, then select, and press home to save changes.
How to set time on the Honeywell pro series thermostat?
T6 pro series
- Click menu navigate using the arrows to get to the clock settings
- Click the set-time option. You can use the minus and plus indicators and press done to save.
T4 pro series
- To set up the time, start by selecting the time format you prefer (24hr or 12 hr system) using the plus or minus button.
- After, use the positive or negative key to set your preferred time.
How to unlock the Honeywell pro series thermostat?
- Click the center button from your home screen.
- You will need to key in the passcode; the default passcode for t4 is 1234; select the plus or minus key for the first digit (1), then press select, do this for the other digits till they are displayed on the screen together then click select.
- If you have entered the wrong passcode, lines will flash on the screen. Go back and follow the steps above to unlock.
How to remove the permanent hold on the Honeywell thermostat pro series?
- Click the menu button.
- A hold option will appear; select cancel to remove the permanent hold.
How to clear the schedule on the Honeywell thermostat pro series?
- Click the set button till the scheduled programs appear on the screen
- Make sure the heat or cool is set to your thermostat
- Tap the arrow facing upwards and the hold key at the same time for about four seconds
- Let go of the two buttons simultaneously, which will clear the scheduled programs.
How to remove the cover on the Honeywell pro series thermostat?
✔ Grab the thermostat and hang on to it
✔ Gently rock it back and forth and pull; your cover will come off.
Does the Honeywell pro series thermostat have batteries?
Honeywell pro series has a battery that you must change only once a year or before going away from home for over a month.
However, the Honey well t6 pro (z wave) does not need a battery if you have wired it to work on twenty-four VAC energy since installation.
How to replace the battery in the Honeywell pro series thermostat?
- Begin by taking the thermostat off the wall gently using the steps discussed above
- There are 2AA batteries inside; use the plus side to get the batteries off
- There is a plus sign that guides you on putting the batteries. Start by putting the minus side first and push it down to have the plus side in place
- To install it, ensure you align the pins on the back of the thermostat with the wall piece and push the thermostat back to the wall until it fits.